Shimpo DT-721 Bedienungsanleitung PDF herunterladen

Instruction ManualInstruction Manual

Instruction Manual

DigitalDigital

Digital

Stroboscope/TStroboscope/T

Stroboscope/T

achometerachometer

achometer

Model DTModel DT

Model DT

-721-721

-721

Features

Operational Precautions

! Do not operate or store instrument in the following

places:

Explosive areas

Near water, oil, dust or chemicals

Areas where temperature is above 104°F (40°C).

! Do not look at the emitted light for long periods of

time; it can be harmful to the eyes.

! Do not disassemble or repair unit while in operation.

! To mount the strobe on a tripod (or any other

mounting surface), use screw 1/4 - 20unc, length

8mm or shorter, for the tripod screw hole on the bottom.

Setter

The setter changes the flashing rate. Turn CW to

increase the rate, turn CCW to decrease rate.

x2 Switch

Pressing "x2" will double and display the flashing rate.

1/2 Switch

Pressing the "1/2" will divide flashing rate by two and

display it.

Plus (+) Switch

When object appears to be standing still, pressing "+"

will give the illusion that the object is moving towards

the opposite direction of rotation. This action increases

the rate slightly (phase shift) and is used to place the

object in desired position.

Minus (–) Switch

When object appears to be standing still, pressing "–"

will give the illusion that the object is moving towards

the rotating direction. This action decreases the rate

slightly (phase shif) and is used for the same reason as

above.

Input and Output Connectors

Phonejack (3.5 mm)

Tip: Signal

Sleeve: GND

Power switch with lock option

Power cord

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Operational Precautions

Instruction ManualInstruction ManualInstruction ManualInstruction ManualInstruction ManualDigitalDigitalDigitalDigitalDigitalStroboscope/TStroboscope/

Seite 2 - True RPM

OperationTrue RPMInternal Triggering1. Firmly plug power cord into a 100VAC (Japan), 120 VAC(US) or 230 VAC (Europe) single phase.2. Aim light beam at

Seite 3 - Specifications

When FPM reading is displayed but unit is not flashing,flash tube may need to be replaced.1. Unplug line cord from power line. Turn power switchOFF. W

Seite 4 - Dimensions (mm)

"""""""""""""""""""""""""

Kommentare zu diesen Handbüchern

Keine Kommentare

Shimpo DT-721 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Shimpo DT-721 herunter. SHIMPO DT-721 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Shimpo DT-721